Skip to main content
Try for free

Log labor to a job

Record the time spent on a job.

Updated Nov 5 2026

Who this is for

Operators log the time they spend on each work order. Supervisors correct mistakes, and Accounting relies on the time for the job's cost.

Applies to
Production
Accounting

Why it matters: labor is usually the biggest cost on a built job after material. Time that isn't logged makes the job look cheaper than it was; time logged to the wrong job makes two jobs wrong.

  1. Start the timer

    1. Open the work order and click Work in its left-hand menu (the Workorder tab on the older screen).
    2. Click Start Work.
    3. In the Start Work window, check the Work Location (Location on the newer Work view), and pick the Build Operation and whether this is Setup time. Users who can manage work time also see Number of Workers, for time logged by a crew.
    4. Click Start Work. The timer runs until you stop it.
  2. Stop the timer

    1. On the work order's Work view, find your running time under Active Time.
    2. Type how many pieces you finished in # Pieces Finished. Type 0 if you finished none.
    3. Click Stop Work.
    4. The time is now on the job, costed at your own labor rate if you have one, otherwise at the work location's rate.
  3. Delete a wrong entry

    1. On the work order, open its History view and scroll to Work History.
    2. Click Delete next to the wrong entry. Only users who can manage work time see Delete; if it is missing, ask your supervisor.
    3. Click OK to Are you sure you want to delete this work history?

Other ways to do this

Type in the time instead of running a timer

The work was done without a timer, or is being logged afterwards.

  1. On the work order, click Work, then Start Work.
  2. In the Start Work window, pick the location and operation.
  3. Under Or Add Time & Close at Once, type the time in Hours and Minutes (and any Pieces), and click Submit. That section is there only if your company lets everyone type in time, or you can manage work time. If it is missing, ask your supervisor.
  4. Confirm Cetec shows Work Added; Time {minutes} Min. To correct it, delete it as in Delete a wrong entry.