Skip to main content
Try for free

Track tooling

Know what tools the shop has, where they are, and whether they are fit for use.

Updated Nov 5 2026

Who this is for

Production leads and quality technicians keep a register of the shop's tools, fixtures and gauges, and record their maintenance and calibration. Operators check a tool is in date before they use it.

Applies to
Production
Inventory

Why it matters: a gauge out of calibration can pass bad parts, and an auditor will ask for the record that shows every tool used on a job was in date.

  1. Add the tool to the register

    1. Open Production > Tools > Tool List and click Add New Tool.
    2. Fill in the tool's Type, Description, Manufacturer, Model, Serialnum and Asset Owner, and where it lives: Work Location and Box or Bin. Every tool needs a serial number; without one Cetec shows Serial required!
    3. Set the Next Maint/Cal Date, and the Maintained By (Vendor) if an outside lab calibrates it.
    4. Click Submit. Cetec opens the new tool's edit screen.
    5. Under Maintenance Schedule, pick the Maint Type and Maint Frequency and click Add. Without a schedule the tool never shows on the maintenance list. To add a maintenance type, use ADD/EDIT on the Add Tool form.
  2. Find tools due for maintenance

    1. Open Production > Tools > Tool Maintenance.
    2. Check Next Maint. Date and Maint. Frequency for each tool, and pick the ones due.
  3. Record the maintenance

    1. On the Tool Maintenance list, click Perform Maint. for the tool. Or open the tool and click Perform Maint. in its left-hand menu.
    2. Fill in the Maintenance Type, Maintenance Date, whether the Maintenance Passed, and any Maintenance Notes. A failed maintenance is recorded, but the schedule's next date doesn't move on. The tool stays due until it passes.
    3. Click Submit. Cetec shows Maintenance Data Recorded - New Maintenance Date is {date}, the next date worked out from the schedule. A tool with no schedule gets no next date: Cetec says the new date is unspecified and clears it.

Other ways to do this

Lend a tool out and back

The shop tracks who has each tool, and which order it is used on. This needs the Manager or Tools role.

  1. Open the tool and click Check In/Out in its left-hand menu.
  2. To check it out, pick who has it in Check Out. Check Out is required.
  3. If it is used on a job, pick the order line in Order. The box only offers existing order lines.
  4. Click Checkout Tool. Cetec shows Tool checked out successfully.
  5. When it comes back, pick Check In By, choose where it goes in Put Away To, and click Put Tool Away. Cetec shows Tool checked in successfully.