User Setup
Set up a new person for the shop floor: create their login, give them the production roles, and fill in the production settings on their edit screen (work locations, default production location, labor rates) so their time lands in the right place on the Production Order List.Updated Nov 9 2026
Before you start
- Admin > Users > User List is only in the menu for users with the Admin role.
- To create the login and set the basic profile and roles, follow How To Add Users. This guide covers the production settings that guide doesn't.
- For what each role allows, see How To Assign User Roles & Restrictions.
- Your work locations (production statuses) must already exist, because the location fields below only offer ones that are set up.
-
Create the user and give roles
- Go to Admin > Users > User List and click Add New User. Type a Username and a Password, then click Create New User. (Optional: pick a co-worker in Copy User Profile Of to copy their roles, valid locations, default locations, labor and overhead rates and similar settings, then skip to step 5 and check them.) Cetec opens the new user's edit screen.
- In Roles, click the +, type in Search roles... and pick Production. Click + again for each further role. The Production role is what shows Production > Orders > Production Order List in the menu.
- For a shop-floor worker who should see only production screens, add Production Only instead. Their menu then shows only Production > Orders and Scheduling > Schedule By Location. Production Only overrides the user's other roles, and Cetec won't save it together with Admin.
- Under the Roles field, check Current billing category. It shows Production Only for a user with that role and Full User otherwise.
-
Set the production settings
- Scroll to Valid Work Locations and pick the production locations this user may work in. Leave it empty to let them work in any location. Once it has entries, Cetec refuses to let them record work instructions on an operation in any other location (You do not have access for this location to be able to record instruction).
- In Default Production Location, pick the user's usual production location, or leave it as None. Cetec counts this user as staffing that location when it works out capacity on the scheduling screens.
- If the user works at a tablet or scanner, set Has Barcode Scanner (force tablet mode) to AutoDetect, Has Scanner or No Scanner. Tick Kiosk Mode Enabled? for a shared shop-floor kiosk login.
- Optional: enter User Specific Labor Rate (Cost), User Specific Labor Rate (Resale) and User Specific Overhead Rate if this person's time should be costed differently from the location's rate. When the Labor Rate (Cost) is left empty or 0, Cetec uses the production location's rate instead, and then the company-wide labor rate.
- Optional: set Force Password Reset to Yes so the user picks their own password at first login.
- Scroll down and click Submit. Cetec shows User Updated!. If it shows an error, nothing was saved.
-
Check it worked
- Ask the user to log in (or log out and back in if they were already signed in). Go to Production > Orders > Production Order List. You should see the production orders; a Production Only user finds it under Production > Orders.