Skip to main content
Try for free

Receive material

Take delivery of material and record what arrived.

Updated Nov 5 2026

Who this is for

Receiving and warehouse staff take deliveries in against the purchase order and put them on the shelf. Buyers watch what has arrived, and Accounting matches the receipt to the vendor's bill.

Applies to
Inventory
Purchasing

Why it matters: until a delivery is received, Cetec doesn't know the parts are in the building. Production can't pick them, the PO stays open, and Accounting can't pay the vendor. A receipt with the wrong quantity, cost or lot code follows the parts into every build and shipment.

  1. Receive the line

    1. Open Warehouse > Receiving > Receive Parts.
    2. Type the PO number in the PO or RMA ID box and pick the line from the list.
    3. Check the quantity, cost, lot code and date code Cetec fills in, and change them to match the delivery and its packing slip. Changing the Date changes only the general ledger date. It does not change the receipt date, the stock's history or the inventory activity.
    4. Check the Location. It is the warehouse (for example MN), not a bin. Every receipt lands in the receiving bin and waits on the Put Away queue.
    5. Fill in anything else the line needs: Revision, Expires On, Country of Origin, and the packing slip number (Packing Slip #; use +/- Columns if it is hidden).
    6. If the part needs inspecting when it arrives, fill in Qty Accepted and Qty Rejected. Rejected parts create an NCR. The inspection itself is in Inspect a receipt.
    7. Click Receive. If the PO has more lines arriving in the same delivery, click Receive & Keep PO instead, so the next line is ready to pick.
    8. Cetec shows Part {part} Received! with links to the PO Line Receipt, its label, any incoming inspection, and # Orders Possibly Needing Part. Your company may have Cetec open an incoming inspection for every receipt; see Inspect a receipt.
  2. Attach the packing slip

    1. On the Receive Parts screen, click Upload Documents, or the PO Line Receipt link Cetec shows after receiving. Or find the receipt in Purchasing > Receipts > Receipt List (the list is headed PO Receipts; match the Receipt Code).
    2. On the receipt, click Documents in the left-hand menu.
    3. Upload the packing slip, certificate of conformance or any other paperwork that came with the delivery.
  3. Put the material away

    1. Open Warehouse > Receiving > Put Away. The screen is titled Receipts Pending Put Away.
    2. Find the receipt in the list. Primary Bin and Preffered Bins (spelled so on screen) show where the part is meant to live. A part's primary and preferred bins are set for each warehouse on the part's View screen: click the pencil next to Warehouse Specific Data.
    3. Hover over the receipt's row and click Put Away at its right-hand end.
    4. Type the bin in New Bin Name, or pick it from Select Preferred Bin if your company only allows preferred bins. Bin names may use only A–Z, 0–9, hyphens and spaces.
    5. Change the quantity to put away only part of the receipt. To split it across bins, type how many extra bins in (+ Bins) and click Split.
    6. Click Submit. If the bin already holds the same part, Cetec asks whether to merge them. Merging means Cetec can no longer show the cost of each receipt separately for anything built from that bin later. It can't be undone.
    7. Cetec shows Receipt {receipt} Put Away Into Bin {bin}. For the next receipt, open Warehouse > Receiving > Put Away again.
  4. Cancel a wrong receipt

    1. Open the receipt from Purchasing > Receipts > Receipt List (headed PO Receipts). Match the Receipt Code, not the Receipt column, which is a different number.
    2. Click Cancel Receipt in the left-hand menu and confirm. Cetec shows Receipt Cancelled and opens the PO.
    3. If Cancel Receipt is greyed out, hover over it to see why. Can't Unreceive If Picked means some of the parts are picked to an order. Dekit them first (see Pick material for a job). Can't Unreceive If Shipped means they have already gone out. Bin Qty != Receipt Qty or Bin Cost != Receipt Cost means the bin was changed after receiving, so the receipt can't be reversed cleanly. Correct the stock instead (see Adjust stock).
    4. Receive the line again with the right details. Cetec reverses everything the receipt did: it removes the stock, reverses the ledger entry, deletes the incoming inspection and any voucher, and reopens the PO line. Don't adjust the ledger by hand as well.

Other ways to do this

Start from the PO

  1. On the PO, click Receive on the line. Cetec opens Receive Parts with the PO and line filled in.
  2. Continue at Receive the line, step 3.

Receive parts that have no PO

  1. On Receive Parts, leave the PO box blank and type the part number in Prcpart. Use this for parts such as samples.
  2. Receive as usual. The receipt shows on the Put Away queue marked (Non-PO).

If your company blocks receipts without a PO, only users allowed to make them can do this. Others see PO Required To Receive.

Receive every open line at once

Receive All Lines? takes in every open line at once, but it skips inspections, serial numbers, unit-of-measure conversions and landed cost. Don't use it when any of those apply.