How To Activate / Inactivate Parts on a Part Spec Group
A part spec group's parts come from its rules: each rule matches one part number or a pattern. Turn a rule off to take its parts out of the group, or back on to add them again.Updated Nov 9 2026
Before you start
- Part Spec Groups is under Parts and is open to users with the User role (or All).
- Saving changes needs the Can Edit Part Spec Groups function (Admin, Manager, Engineer or Part Spec Group Admin role by default). Without it Cetec shows Failed to update Part Spec.
-
Find the part spec group
- Go to Parts > Part Spec Groups. The list opens showing Active groups.
- To narrow it, click the filter search bar (Filter or search…), choose Name, Customer, Tags, Prcpart, Status or ID, set the value, and click Apply (n). To find an inactive group, click the value Active on the Status is Active chip and choose Inactive or All, then Apply (1). Applied filters show as chips in the filter search bar; click a chip's × to drop it.
- Click the group's Name (or ID) to open it.
-
Inactivate or activate a rule
- On the part spec group's screen, find the rule under PART SPEC RULES. Name is the rule's
label, Prcpart Match is the part number or pattern (
%is a wildcard), Num Part Matches is how many parts it covers, and Active shows Yes or No. - To inactivate a rule, tick its Delete box (the row turns pink and Active shows No straight away, but nothing is saved yet). To activate it again, untick Delete.
- Click Submit under the rules table (the Submit at the top of the screen saves too). If the group is used on BOMs, Cetec asks you to confirm changing it without creating a new group; click OK to go ahead.
- Cetec shows Part Spec Data Updated Successfully. PARTS IN SPEC (BASED ON PART SPEC RULES) now lists only the parts matched by active rules.
To add a rule, type a name for it in the (create) box under the rules and click Submit. The box only sets the rule's Name: the new rule has an empty Prcpart Match and covers no parts. Then type the part number or pattern (at least 3 characters,
%as a wildcard) in that rule's Prcpart Match box and click Submit again; for a pattern, ignore the part suggestions that drop down. Num Part Matches and PARTS IN SPEC update once the save finishes. - On the part spec group's screen, find the rule under PART SPEC RULES. Name is the rule's
label, Prcpart Match is the part number or pattern (
-
Inactivate or reopen the whole group
- On the part spec group's screen, click Delete at the top right and confirm Are you sure you want to delete this Part Spec? Cetec inactivates the group and takes you to the old Part Spec Group list (with a DEPRECATION WARNING). Go back with Parts > Part Spec Groups; the group now only shows when Status is Inactive or All.
- To bring an inactive group back, open it (filter the list by Status Inactive), click Reopen and confirm Are you sure you want to reopen this Part Spec? Cetec shows Reopened the part spec. and the group and its rules are active again.