How To Create a Part
Create a part from the Part List, then fill in its profile on the Edit screen Cetec opens next.Updated Nov 9 2026
Before you start
- Parts > Lists > Part List is open to the User role.
- The part's PRC (three-character product code) must exist. To add one, see How To Create a PRC (Product Code).
- Saving the part's profile needs the Can Edit Part function (Manager, Purchasing, Supervisor, Part Edit, Can Edit BOM or Sales by default; the Block Edit Part role takes it away).
-
Create the part
- Go to Parts > Lists > Part List (the page is headed Parts) and click Create Part at the top right. The Create Part window opens.
- Fill in the fields:
- PRC (required) – choose the product code. The list starts empty.
- Part (required) – the part number, without the PRC. Cetec puts the PRC in front, so
PRC
RAWand part1K-0603make the partRAW1K-0603. Once a PRC is chosen, the box shows the last part number created in it (Last - …), or (no prev part number) if it has none. - Location (required) – starts filled with your default selling location.
- Part Description – optional.
- Revision – optional name for the part's first revision.
- BOM? – leave Create as BOM unticked for a purchased part or component. Tick it for an assembly (see How To Create a BOM).
- Click Create. Cetec shows Part Created and opens the part's Edit screen, headed Part followed by the full part number.
-
Fill in the part's profile
- On the part's Edit screen, in General Information, check the description and set the stock UOM (unit of measure), such as EA. A new part may have no UOM until you set one. Choosing a UOM pops up a warning that changing it affects inventory values and costs; click OK to close it. The new UOM is saved when you click Update.
- Tick Non-Inventory? only for a part that is sold or bought but never stocked, such as a fee or a service.
- Scroll down to the Accounting Information, Production Information and Purchasing / Receiving Information sections and check the defaults that matter for how the part is bought, stocked or built. The accounting defaults come from the PRC.
- Click Update. Cetec shows Part Updated successfully. Each section's Update saves the whole profile.