Skip to main content
Try for free

How To do a BOM Breakdown

A BOM breakdown takes assemblies out of a bin and puts their components back into stock, for example to recover parts from finished units or to stock a kit you buy as one part.

Updated Nov 9 2026

How To do a BOM Breakdown

Allow external media cookies to watch this video.

Before you start

  • The part must be a BOM with stock in a bin. Cetec breaks it down into the components on the BOM revision you choose (the current revision unless you open the breakdown from a bin with another revision).
  • You need the Can Edit Part Bin Info function to see the bin's Edit controls, and Can Edit Part to run the breakdown. The Manager, Purchasing, Supervisor and Part Edit roles have both by default.
  • You need an inventory adjustment reason code. Your admin keeps them in Admin > Maintenance > Data Maintenance (Inv Shortage Reason); a code shows in the list only when it is marked visible. A separate code such as BOM Breakdown makes these adjustments easy to find later.
  1. Open the breakdown from a bin

    1. Go to Parts > Lists > Part List and click the BOM part's number in the PrcPart column. The part's view opens.
    2. Scroll to PART BIN DATA under the warehouse section and click Edit at the right end of the bin that holds the units. The bin's edit area opens below it (the link now reads Hide).
    3. In the bin's edit area, click BOM Breakdown. The BOM Break Down screen opens.
  2. Break the BOM down

    1. On the BOM Break Down screen, check the Prcpart, Bin and Qty In Bin at the top.
    2. Enter Qty Of part To Reduce: how many assemblies to take out (no more than the bin holds). Cetec multiplies each component's Put Back? quantity to match.
    3. Check each component's Put Back? quantity and Cost. Change them if some components are scrapped or worth less. Net Comp Cost and Net BOM Cost at the bottom show the value going back in against the value coming out.
    4. Under Reason For Break Down, choose the reason code and add a comment (for example part recovery).
    5. Click Submit. Cetec shows BOM Breakdown Successful! and Qty In Bin drops. It relieves the assemblies from the bin and adds the components to stock at that location, with the reason and comment on each inventory adjustment. If the bin is now empty, Cetec returns you to the part's view.
  3. Prompt a breakdown at every receipt

    Use this for a part you always break down when it arrives, such as a kit bought as one part number.

    1. Open the part and click Edit in its left menu.
    2. In Purchasing / Receiving Information, set Break Down At Receipt? to Yes and click Update.
    3. When the part is received, the receipt confirmation and the Put Away screen show a Break Down BOM link. Click it to open the BOM Break Down screen for that receipt's bin, then follow Break the BOM down.