Return material to a vendor
Send rejected material back to the vendor.Updated Nov 5 2026
Who this is for
Buyers arrange returns with the vendor. Quality decides what is rejected, the warehouse picks and ships it, and Accounting claims the credit.
Applies to
Why it matters: rejected material you don't send back is money lost and a bin full of parts nobody should use. A return without a debit memo is a credit the vendor never pays.
-
What goes back, and why
- Know the parts, quantities and bins, the vendor, and why they're going back.
- Get the vendor's RMA number if they issue one.
-
Start the vendor return
- From the receiving inspection (or the NCR) for the material, click
Create Vendor Return. Cetec opens the new return.
- From the receiving inspection (or the NCR) for the material, click
-
Set what goes back
- On the vendor return's edit screen, check the vendor,
Vendor Address, location andShip Via. - Put the vendor's RMA number in
Commentsor the description. There is no field of its own. - On each line, set the
Return Qtyand check the bin. - Click
Update. Cetec says Vendor Return Updated. - If Cetec warns the return quantity is more than is on the shelf, some of the parts may be picked for an order. Check before you continue.
- On the vendor return's edit screen, check the vendor,
-
Process the return
- On the vendor return's edit screen, choose how the parts leave in the box beside
Return:Issue Order For Picking / Shippingmakes a vendor return order to pick and ship.Auto Relieve Parts & Invoicetakes the parts out of stock and invoices the return at once, with nothing to pick.
- Click
Returnand confirm Performing a Return will remove included Parts from Inventory. Cetec tells you the vendor return order's number, or that the return is processed.
- On the vendor return's edit screen, choose how the parts leave in the box beside
-
Ship it to the vendor
- If you chose
Issue Order For Picking / Shipping, pick the parts on the vendor return order, as in Pick material for a job. - Ship it from the order's invoice screen, where the button reads
Return Parts. It is the same screen as shipping a sale in Ship and invoice. - Print the packing slip from the return's
Packing Slip. - Click
Closeon the return once it has gone. Cetec lets you close a return that was never processed or shipped, so only close it when the parts have actually left. A closed return can be reopened withReopen.
- If you chose
-
Claim the credit
- On the return, click
CreatebesideDebit Memoand confirm. Cetec says Debit Memo Created and links it. - Apply the debit memo to what you owe the vendor. See Claim a vendor credit.
- On the return, click
Other ways to do this
Start from the Vendor Returns list
- Open
Parts > Vendor Returnsand clickCreate. - Choose the vendor and click
Create. Cetec opens the new return. - Continue at Set what goes back.
Start from the part's inventory
On the older part inventory screen, click Vendor Return on the bin's row. Cetec
opens the new return. Continue at Set what goes back.
The vendor replaces the parts
If the vendor replaces the parts instead of crediting you, skip the debit memo and receive the replacements against the PO. See Receive material.