Skip to main content
Try for free

Set up a part

Set up a part so it can be bought, stocked and built.

Updated Nov 5 2026

Who this is for

Engineers set up the parts their BOMs are made of. Buyers set up parts they need to purchase. Warehouse staff rely on what is set here to receive and stock them.

Applies to
Engineering
Purchasing
Inventory

Why it matters: every quote line, BOM component, purchase order and stock count starts from a part. A part filed under the wrong code, in the wrong unit, or with no vendor part number means wrong costs, receiving errors, and buyers retyping numbers on every PO.

  1. What you need before you start

    1. Know the part's PRC — the three-character product code it belongs to. The PRC decides the part's default vendor, lead time and accounting.
    2. Know the part number. Within a PRC each number can be used once.
    3. Know the location that will stock it. Cetec suggests your default selling location.
    4. Decide whether it is an assembly. If it is, the part also gets a BOM, as in Define a BOM.
  2. Check the PRC exists

    1. Open Parts > Lists > PRC List and look for the code. The list loads by itself. Read its Description too (scroll right in a narrow window): the create-part form lists PRCs by code only.
    2. If it is missing, click Create PRC, type the three-character code, and click Create. Create stays greyed out until the code is exactly three characters.
    3. Open the PRC's window: point at its row and click the edit icon at the right end of the row (Edit PRC <code> opens). Open it the same way to change a PRC later.
    4. Set what parts under it should default to — Default Vendor, Leadtime, the G/L accounts, Default as Non-Inventory — and click Update. Set Default as Non-Inventory on a PRC used for fees, freight or services, and every part created under it starts as non-inventory.
    5. Check the other defaults in the PRC window that every part under it inherits. Block Autopick? keeps its parts out of the automatic pick at order completion. Force Resale stops anyone editing the resale price on quotes and orders. Default PRC makes it the PRC Cetec uses when it creates a part for you, such as an imported part; only one PRC can be the default, and the create-part form does not pick it for you. The incoming inspection and shipping/packing instructions print for each part unless the part sets its own.
  3. Create the part

    1. Open Parts > Lists > Part List and click Create Part (Create New on the older list).
    2. Pick the PRC (the box starts empty), then type the Part number. The box shows the last number created under that PRC as a hint.
    3. Check the Location, and add a Part Description and a Revision name if you want them.
    4. Leave BOM? unticked for a component or purchased part. Tick BOM? for an assembly. Cetec then opens the new revision's BOM instead of the Edit screen, so continue at Define a BOM.
    5. Click Create. Cetec says Part Created and opens the part's Edit screen.
    6. If Cetec says the part already exists, it does. Open it and use Edit instead.
  4. Fill in the part's profile

    1. On the part's Edit screen, in General Information, confirm the description and set the stock UOM (unit of measure), such as EA for individual pieces. Check this even on a new part: the default may be blank. Cetec opens the Edit screen after Create; later, open the part and click Edit.
    2. For a part that is sold and costed but never stocked, tick Non-Inventory? before saving.
    3. Look over Accounting Information, Production Information and Purchasing / Receiving Information (open any that are collapsed). Review the defaults relevant to how this part will be bought, stocked or built. Accounting Information starts from the PRC's accounts. Change them here only when this part must post differently from the rest of its PRC.
    4. If you buy in a different unit than you stock in, set Purchase UOM in the purchasing section and arrange the conversion with Purchasing, who set it up. For example, stock in EA and purchase in packs of ten only when the conversion is set up.
    5. Click Update after all changes. Each section's Update saves the whole profile, including fields in the other sections.
    6. Reopen the profile or part view and check the saved UOM and other changes before anyone quotes, purchases or receives the part.
    7. Set reorder point, order quantity and bins for each warehouse on the part's inventory view, not here. That is part of Plan what to buy.
  5. Add customer and vendor part numbers

    1. If a customer, vendor or manufacturer uses a different number, open the part, open MAINT + in the left-hand menu and click Crosses (n). Skip this section when there are no alternate numbers to record.
    2. In the bottom row, type the other number under Cross Prcpart (any text; it need not be a part in Cetec, despite the Search parts... hint) and choose the Cross Type: Customer Part, Vendor Part, Manufacturer Part or Part Synonym.
    3. For a customer or vendor part, choose who it belongs to under Association.
    4. Click Update (at the far right of the row in a narrow window), then check that the saved row has the right number, type and association. A customer part number can then be picked as the Cust Part # on a quote, and a vendor part number fills in by itself when you put the part on that vendor's PO.
    5. To remove a cross, tick Drop? on its row and click Update.
    6. To search all crosses, use Parts > Lists > Cross Part List.

Other ways to do this

Start the form from global search

  1. Open global search, choose Create, then Part. It opens the same form as Create the part.

Clone an existing part

To set up a part much like one you already have.

  1. Open that part and choose MAINT + > Clone.
  2. Enter the new part number under Clone To New Part. Cetec copies the part, the BOM of its current revision and related data to the new part.
  3. Check the copy's description, UOM and BOM before using it.